|
This site provides
information about industrial coatings, paints and finishes. |
Primers
Acrylic Metal Primer
This unique water-thinned, acrylic primer minimizes flash rusting
and protects the steel from corrosion. Because it is water thinned,
it has less odor and reduces the risk of fire hazard. This product
eliminates the need for expensive solvents, and also performs well
as a tie coat or barrier coat over zinc coated surfaces. This primer
can be applied to damp surfaces, and adheres well to most
hard-to-coat substrates.
Universal Metal Primer
Offers excellent rust inhibition and good adhesion, both of which
contribute to extended coating life. This coating serves as a
barrier coat which will keep hot solvent coatings from attacking
conventional coatings. |
 |
Auto paint
Types of automotive paint, coatings or finishing systems include:
urethane base coat, acrylic lacquer clear coat, urethane clear coat;
or synthetic and acrylic enamels for some older vehicles. All
current vehicle are painted in base coat and clear coat. If your vehicle is two tone or has a different bumper color, use
the original factory colour code and inform your supplier of the two colors on
your car along with the desired color.
Most modern vehicles and some older cars are available in only a
basecoat formula which requires clearcoat. |
Heat Resistant Coatings
High heat silicone alkyd coating is recommended and designed to
protect steel that is exposed to heat ranges up to 800° F. For best
results apply in a two coat thin film system. This coating system
provides excellent weathering. Resists mild fumes and
properly cured films will resist thermal shock.
Features
Protects surfaces up to 800° F.
Excellent weathering.
Resists mild fumes.
Many
Colors Available plus
Aluminum and Black |
 |
Thinners
Inorganic Zinc Primer Thinner
Urethane Retarder
Aliphatic Urethane Thinner
Aromatic Thinner
Epoxy Thinner
Hi-Flash Naphtha ThinnerThere are many types of thinner or
solvent specifically formulated for use as a thinner and clean-up
solvent for different Primers.
|
 |
Oil or Alkyd Finishes
Urethane alkyd is superior to conventional alkyds when applied
to surfaces that are intermittently exposed to light chemical
environments. Provides better color and gloss retention than epoxy
esters on exterior exposures. Provides good abrasion resistance on
high traffic floor areas. Designed for interior or exterior
application on metal, wood or concrete surfaces. Easily applied by
brush, roller or various spray methods.
Features
Good color and gloss retention.
2 hour dry to touch (@ 70° F).
Good abrasion resistance. |
Chemical Resistant Metal Primer
This primer provides excellent chemical, acid, and alkali
resistance. It offers fast recoat time, exceptional rust inhibition
and abrasion resistance. It can be applied, and will cure at
temperatures as low as 5° F. It has low water permeability and is
not affected by the alkalinity of concrete. Provides excellent
surface and intercoat adhesion, even to galvanized metal such as
that used in cooling towers. It protects metal that is exposed to
high humidity, such as cooling towers.
Features
Excellent rust inhibition.
Fast dry and fast full cure times.
Outstanding intercoat adhesion.
|
|
Disclaimer: Information contained on this page has been gathered
from various internet sites, due to this we therefore cannot confirm the accuracy
of this information and make no warranties or representations in
connection therewith. |
|
|
